Pipes don't wait for daylight to fail, and our Draper dispatch team doesn't wait for morning to respond. Our Draper-based teams arrive with truck-mount extractors, moisture meters, and drying gear staged and ready to go.
Hirex Water Damage started because homeowners in Draper, UT kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Draper roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Each lead tech holds an IICRC Water Restoration Technician certification and has personally handled clean-water, gray-water, and contaminated black-water losses, so Flood Damage Repair in Draper isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Draper, UT, so you're protected from the moment our truck pulls into the driveway.
Because our equipment lives in a Draper, UT warehouse rather than out of state, we're not waiting on a supply run before we can start extraction.
Ask any Draper property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Draper call at a time.
Water damage doesn't always look dramatic at first — some of the costliest Draper jobs we've handled began as a small, easy-to-miss problem. Here's what tells us a property needs professional attention rather than a mop and a fan:
Recognizing one of these signs early is the difference between a contained repair and a gutted room, so call our Draper team and get a straight answer on how urgent it is.
Whether it's one bedroom carpet or an entire flooded commercial floor, our Draper crews scale the response to match the loss — nothing gets a cookie-cutter response.
Our Draper units run truck-mount extraction pumps that pull thousands of gallons per hour, cutting standing-water time from days to hours. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Our drying plans use moisture meters and thermal imaging to target air movers exactly where hidden moisture is trapped, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Draper homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Draper businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Draper crews are trained for exactly that protocol.
On top of standard drying, our Draper crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.
You get a written estimate before any equipment runs, not a mystery total handed to you after the fact.
Because our equipment cache sits inside Draper, UT, most Draper calls see a technician on-site in under 60 minutes.
Our paperwork is built to match what adjusters expect, and we'll speak with your insurer directly on your behalf.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
A short call with our Draper dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
Our nearest available Draper crew is dispatched immediately with truck-mount extraction gear on board.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
We measure moisture with instruments, not guesswork, and we won't sign off on a Draper job until those readings match the dry standard for the materials involved. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Draper paperwork, not just mentioned over the phone. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"Nobody wants to call about a sewage backup, but they walked me through the containment and PPE process calmly." — Lena G.
"The quote matched the final invoice exactly. No surprise charges tacked on at the end." — Sam O.
Because our equipment is staged inside Draper, UT, most Draper calls see a technician on-site within 60 to 90 minutes of the initial call.
We always quote first. You'll see a written estimate for the Draper job before any drying equipment starts running.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Draper properties.
Direct adjuster communication is standard — we send photo and moisture documentation formatted for a Draper insurance claim.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Draper job as complete.
We regularly handle sewage backups in Draper using full containment, PPE, and EPA-registered antimicrobial products.
If it's safe, shut off the water source, move electronics and valuables away from the affected area, and avoid the space if standing water is near outlets.
Yes, we regularly respond to commercial and multi-unit losses in Draper, including retail, restaurants, and office space.
Most Draper residential jobs dry out in 3 to 5 days depending on how much material got wet and how long it sat before extraction.
Quick extraction and drying in Draper significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
We stand behind every Draper job with a documented dry-standard guarantee and a 30-day callback policy.
See the zip codes and nearby cities listed below — our Draper crews cover that full radius.
Draper is our home base, and our reach extends across Draper, UT through a network of staged equipment and on-call technicians. If your address falls inside or near Draper, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Draper, Draper, UTReach our Draper line directly and get a technician on the way today.
Call +1-844-234-5373